The appearance is particularly clean thanks to the option of placing both electrical and gas outlets on the sides, separated in full compliance with current regulations by watertight bulkheads, leaving the front free of utilities, thus providing greater scope for customization of finishes. Thanks to the wide range of colors, the medical device is sized in length so that, once installed on the wall, it is raised approximately 300–500 cm from the floor and rests against the false ceiling, with the upper end equipped with appropriate holes to allow for the passage of cables and pipes.

The bedhead beam's load-bearing structure is made from a combination of five extruded aluminum profiles, resulting in a modern, compact, yet functional aesthetic with rounded shapes and an absence of sharp edges. The side profiles contain, with appropriate divisions and separations, the 230V electrical wiring for powering sockets, buttons, and switches, as well as the low-voltage wiring for data, telephone, call systems, alarms, and diagnostics, the lighting system management board, DIN-rail terminal blocks, and the general grounding node. The central section houses the piping and connections for the medical gas sockets, separated by appropriate watertight partitions. On the outside, the electrical components—supports, plates, call systems, voice, and equipotential sockets—are located on the sides.

The product can also be supplied in a compact version , in which case the beam does not reach the false ceiling, therefore the gas and electrical services arrive directly from under the wall by means of rear slots machined into the bottom of the beam.

Among the various surface finishes available, there are also those with a wood effect, obtained thanks to a chemical anodization process and two-tone painting, all at the customer's discretion, which give the bedhead beam an elegant appearance that integrates completely with the furnishings of the hospital room in which it will be installed, aiming to recreate a more comfortable environment for the patient.