The load-bearing structure of the bedhead beam is made from a combination of four extruded aluminum profiles, resulting in a modern, compact, yet functional aesthetic with rounded shapes and an absence of sharp edges. The side profiles contain, with appropriate divisions and separations, the 230V electrical wiring for powering sockets, buttons, and switches, as well as the low-voltage wiring for data, telephone, call systems, alarms, and diagnostics, the lighting system management board, DIN-rail terminal blocks, and the general grounding node. The piping and connections for medical gas outlets are separated by watertight partitions. The upper and lower profiles house the LED lighting systems, both for ambient/nighttime and examination/reading purposes. On the outside, the flush-mounted electrical components—supports, call systems, voice, and equipotential sockets—are located on the side panels.

The front panel is made of layered laminate or antibacterial and fireproof HPL bilaminate MDF, with a custom themed decoration chosen by the customer, on which the holes are made for any gas sockets, the flush-mounted keypad for controlling the lights and the instrument panel.

The in-house lighting system allows for indirect lighting via the upper LED bars from 4000 to 8000 real lumens (not nominal) available in 3000/4000/5000°K color temperatures, while the upper night light is managed by lowering the indirect light percentage to preset levels that the customer can easily modify according to their needs by following simple instructions.

Indirect lighting can be placed in a light fixture attached to the wall unit or can be recessed into the upper part of the fixture, hidden by the front wall. Additional lighting options, such as RGB LED modules for chromotherapy, can also be installed on the sides (also recessed).

For direct light for visiting and reading, LED modules are used, placed either in a lighting body attached to the wall unit or recessed (flush) in the front panel, with small dimensions while still maintaining a light level of 1500 - 3000 real lumens for each single module always in the colour temperatures of 3000/4000/5000° K.

The polycarbonate screens that cover the LED systems are thin and linear, which allows for greater resistance to wear and tear with less maintenance and at the same time a high-performance lighting system.